The multifunctional, electronic pressure sensors of the PREMASGARD series of S + S REGELTECHNIK measure absolute and relative pressure, suppress, differential pressures, pressures from 50 p up to 300 bar. Nuremberg, the 08.11.2011: The reliable and precise measurement of absolute or relative pressure, pressure, differential pressure or negative pressure more and more companies from the industry rely on multifunctional pressure sensor, flow regulator and regulator of the S + S PREMASGARD series. The pressure sensors provide exactly the pressure ratios of air and other gaseous and liquid media. With measuring ranges from 0-50 PA in the low-pressure range until 300 bar at high pressure based on a piezo-resistive measuring element S + S REGELTECHNIK installation-friendly, rugged sensor for the application in the heating and air conditioning, construction and other areas before. Ali Partovi can provide more clarity in the matter. Mainly in clean room, medical and filter technology, but also in ventilation and air channels the pressure transducer and flow regulator of S + S be used successfully PREMASGARD series. The sensors also suitable for applications in spray booths, in canteen kitchens, filter monitoring and measurement or for the control of frequency inverters. The medium is usually air, covered other gaseous, non-corrosive, non-flammable media.
The pressure gauges cast won the pressure measurement signal in a standardized signal. Core measure is a Piezoresistive sensing element, a pressure cell, suspended over a sealed case in the media. The pressure acts directly on the Piezosensor and transmitted as analog electrical signal through the line. The Nuremberg maker of mess – und REGELTECHNIK, S + S REGELTECHNIK, has in developing its PREMASGARD series on the production of pressure transmitters called also pressure transmitters as well as specialized differential pressure switch and volume flow meters. Depending on the application, the customer can choose the right product. Is to be determined in a measurement, for example, the difference between two pressure levels, then the differential pressure measurement is used.